Backwater pumping station Pumpfix F for wastewater with sewage
- Pumping station Pumpfix F installed in a concrete slab/floor
Wastewater disposal even when water backs up
If wastewater occurs when the backwater valve is closed, the pump automatically switches on from a certain level. The pump intakes wastewater, mills the solids and reliably discharges the wastewater out into the sewage pipe against the backwater pressure. The only one that pumps against backwater!
Use:
For safe protection from backwater and draining through floor drains below the backwater level that have to be used even during the backflow phase.
Application:
- For toilets, sinks, showers, baths, washing machines etc.
- Cellar steps and light wells up to 20 m²
- Dripwater connections on safety valves and heating equipment
- Basement appartments
- Garage drives
Pre-conditions:
- Free gradient to the sewage pipe
- Rooms with low-priority use according to DIN 12056-4 and extended area of application for basement appartments
Must not be used:
- For draining wastewater collected above the backwater level
- For rain surfaces larger than 20 m²
Product advantages
- Plug & play control unit with self-diagnosis system SDS for maximum safety
- New comfort version for Staufix FKA and Pumpfix F with display for operating state and servicing instructions as well as connection option for building management system.
- Installation in waterproof concrete possible (with gasket set)
- Body with only 9 mm gradient
- Removable inlet/outlet connections – also in Ø 200
- Stainless steel backwater flap as accessory
- Integrated drain function to drainage surface water (for artilces installed in a concrete slab/floor)
- Variable upper section to meet on-site installation requirements (for artilces installed in a concrete slab/floor)
With general technical approval through DIBT. Approval number: Z-53.2-388.
How it works
- Function of backwater pumping unit
- Backwater flap closed
- Discharging against backwater
Technical data
- Performance diagram Pumpfix F
Type of current: Alternating current
Voltage: 230 V
Current: 4.9 A
Motor capacity: P1/P2 1000 W / 550 W
Speed: 2800 min-1
Motor protection: Thermal in the motor
Plug: Safety plug
Operating mode: S3 - 30 %
