Made in Germany KESSEL Logo
search:
 >  >  >  > EasyClean Mix (D+S)

Product search


Please enter an article number or search word to find technical data, specification text and CAD drawings of the product in question.

Grease separator EasyClean Mix (D+S)

Grease separator "D+S"

In the case of the grease separators Mix (D+S) with direct disposal and Shredder-Mix-System extraction is through permanently installed pipes on site connected to the disposal vehicle pump outside the building. This means there are no odour emissions during emptying.

The Shredder-Mix-System serves to circulate and comminute the whole tank content of the grease separator. Comminution, mixing and cleaning are all carried out simultaneously. The version corresponds to the requirements according to EN 1825 and DIN 4040-100.

The grease trap is cleaned by circulating and comminuting the tank contents. This means neither a storage tank nor a hot water connection are required. There is no odour emission during disposal. Cold freshwater is used to clean the system.

Product Advantages:

  • Direct Disposal
    Grease interceptor version with direct disposal connection.

  • Refill Inlet
    Thanks to the included refill inlet it is possible to fill the grease separator without odour emission with the tank closed.

  • Shredder-Mix-System
    With Shredder-Mix-System to circulate and comminute the whole tank content of the grease separator.

  • Inspection Window
    An inspection window allows to monitor the grease layer manually.

  • SonicControl
    Also available with SoniControl, an automatic grease layer thickness measuring device.

  • Long Service Life
    Virgin, non-recycled polyethylene tank guarantees an extremely long service life due to its corrosion free properties.

  • Efficient Extraction
    Wedge-shaped bottom for efficient extraction at the lowest point.

  • Easy to Clean
    Due to wax like surface finish of separator tank.

  • Flexible Installation
    Direction of flow can be changed on site by changing inlet and outlet connections.
  • Refill
  • Shredder
  • Wedge
  • Direction

Size calculation

SmartSelect calculation and selection software for lifting stations and pumps.

SmartSelect makes it possible to size and specify separators according to EN by using up to three calculation methods.

Product Details:

 

Imprint / Impressum | Privacy policy
©1998-2017 KESSEL AG, Bahnhofstraße 31, 85101 Lenting, Germany