Made in Germany KESSEL Logo
search:
 >  >  >  > Separator function based on EN 1825

Product search


Please enter an article number or search word to find technical data, specification text and CAD drawings of the product in question.

Separator function based on EN 1825

The KESSEL Euro separator based on Euro-Norm EN 1825 (as seen in the illustration below) consists of a grease separation chamber with an integrated sludge trap located at the bottom. Following the separator is a sampling chamber. Wastewater containing fats, oils and grease (FOG) is guided into the separator by a pacifying pipe which allows the wastewater to be slowly and evenly distributed into the separator preventing fast flowing wastewater from disturbing the separation process inside the chamber. The separation of the light material (FOG) and the heavier material (sludge) from the wastewater is all accomplished by the force of gravity. Heavily emulsified greases and oils may not be completely separable with the gravity method.

What can enter the separator ?

What can enter the separator ?

Only wastewater containing organic fat, oil or grease (FOG), which are required to be separated from the water, should be allowed into the separator. Under no circumstances should sewage, rainwater or wastewater containing mineral oils (hydrocarbon based) be allowed to enter the separator. Examples of what should be connected to a separator: floor drains with odour traps, drainage channels, sinks, dishwashing machines and cooking vats.

Sludge separation chamber

Sludge separation chamber

The sludge separator serves to collect sludge / sediment which sinks to the bottom of the chamber due to its density being greater than that of the density of water.

Grease separation chamber

Grease separation chamber

In the grease separation chamber, organic FOG (being less dense than water) separate from the wastewater and rise to the surface of the chamber. As more wastewater enters the chamber, the layer of separated greases and oils builds from the top down until the grease separation chamber is full and the entire chamber is emptied.

Our product range

KESSEL’s design based on EN 1825-1 and state of the art manufacturing provide grease separation systems surpassing all needs of the industry. The separators are available in a wide range of sizes and disposal methods to suit every business’ needs. 

 

Imprint / Impressum | Privacy policy
©1998-2017 KESSEL AG, Bahnhofstraße 31, 85101 Lenting, Germany