Skip to main content

Pumping station Aqualift S XL

Mono, GTF1400-S1, 400V

PDF product data sheet

The pumping station for faecal-free wastewater is equipped with a submersible pump and a backflow preventer. The collection tank made of permanently resistant polymer (PE) has an open pump tank with universal connection options. Quick-release closures enable the integrated components to be removed easily. The station is controlled by a user-friendly control unit, which is optionally integrated in the building management system via a potential-free contact. Alternatively, alarm and collective fault messages can be output via a GSM interface. The KESSEL modular system provides different engineering chamber options as accessories for the further layout.

  • Maximum safety
  • Flexible installation
  • Also handles large quantities of faecal-free wastewater
Item no. 8743047
Discount group 3

Pumping station Aqualift S XL Mono, GTF1400-S1, 400V
The pumping station for faecal-free wastewater is equipped with a submersible pump and a backflow preventer. The collection tank made of permanently resistant polymer (PE) has an open pump tank with universal connection options. Quick-release closures enable the integrated components to be removed easily. The station is controlled by a user-friendly control unit, which is optionally integrated in the building management system via a potential-free contact. Alternatively, alarm and collective fault messages can be output via a GSM interface. The KESSEL modular system provides different engineering chamber options as accessories for the further layout. Version: Type of system: Single station Installation: Wet installation Backflow preventer: integrated Delivery state: Pre-mounted for final assembly on site (pumps and sensor system must be fitted on site and control unit must be connected) Type of wastewater: wastewater without sewage General characteristics: Colour: black Standard: EN 12050-2 Dimensions: Length: 1,300 mm Width: 1,300 mm Height: 1,416 mm Tank: Number of inlets: 1 ST Inlet nominal size (DN): 150 Inlet nominal size (OD): 160 mm Pressure pipe connection (DN): 50 mm Pumping volume: 350 l Pumping device: Pump: GTF 1400 Number of pumps: 1 Max. pumping capacity: 31 m3/h Max. pumping height: 10.5 m Operating voltage: 400 V Mains frequency: 50 Hz Operating mode: S1 Power P1: 1.5 kW Power P2: 1.1 kW Speed: 2,900 U/min Max. temperature (permanent) of conveyed material: 40 °C Weight: 22 kg Impeller type: Multi-vane impeller Length of mains cable for pump: 10 m Rated current: 2.5 A Protection class (pump): IP 68 Protection class: I Expected service life (number of switching cycles): 150,000 Expected service life (hours of operation): 5,000 Std Insulation class: H Max. permissible switching frequency: 15 1/h Control: Motor protection switch: yes Level measurement instrument: Float switch

Installation Video

  Title Item no.  
  Title Item no.  
  Title Item no.  
  Title Item no.  
  • Area of application (ATTR-264): drainage
  • Pump type (ATTR-265): submersible pump
  • Pump shaft position (ATTR-266): vertical
  • Pump design (ATTR-267): Dry rotor pump
  • Pump hydraulics (ATTR-268): single stage
  • Pump suction characteristic (ATTR-269): non-self-priming
  • Pump drive (ATTR-270): E-motor for three-phase current
  • E-motor, type of startup (ATTR-271): direct
  • Pump casing material (ATTR-272): Grey iron
  • Upper tolerance of the operating voltage (+) (ATTR-273): 5  PROZ
  • Lower tolerance of the operating voltage (-) (ATTR-274): 5  PROZ
  • Pump electrical connection (ATTR-277): 3/N/PE 400V
  • Motor pump shaft (ATTR-279): continuous
  • Shaft seal (ATTR-280): MS
  • Number of operating pumps (ATTR-281): 1
  • Minimum pumped media temperature (ATTR-282): 0  CEL
  • Maximum operating pressure (Pmax) (ATTR-283): 1,050  HPA
  • Minimum speed for speed adjustment (ATTR-284): no speed adjustment
  • Pump (ATTR-4): GTF 1400
  • Number of pumps (ATTR-181): 1
  • Impeller type (ATTR-8): Multi-vane impeller
  • Max. permissible switching frequency (ATTR-162): 15  1PH
  • Operating mode (ATTR-10): S1
  • Power P1 (ATTR-F4): 1.5  KWT
  • Power P2 (ATTR-F5): 1.1  KWT
  • Speed (ATTR-F2): 2,900  UMIN
  • Operating voltage (ATTR-131): 400  VLT
  • Mains frequency (ATTR-N4): 50  HTZ
  • Rated current (ATTR-N5): 2.5  AMP
  • Max. pumping capacity (ATTR-F7): 31  MQH
  • Max. pumping height (ATTR-F8): 10.5  MTR
  • Max. temperature (permanent) of conveyed material (ATTR-132): 40  CEL
  • Protection class (ATTR-133): I
  • Protection class (pump) (ATTR-125): IP 68
  • Length of mains cable for pump (ATTR-11): 10  MTR
  • Weight (ATTR-191): 22  KGM
  • Insulation class (ATTR-193): H
  • Expected service life (hours of operation) (ATTR-194): 5,000  HUR
  • Expected service life (number of switching cycles) (ATTR-195): 150,000
  • Inlet nominal size (DN) (ATTR-B1CA): 150
  • Length (ATTR-A6A): 1,300  MMT
  • Width (ATTR-A6B): 1,300  MMT
  • Height (ATTR-A6C): 1,416  MMT
  • Number of packages (ATTR-321): 0
  • Type of system (ATTR-2): Single station
  • Installation (ATTR-164): Wet installation
  • Backflow preventer (ATTR-165): integrated
  • Level measurement instrument (ATTR-7B): Float switch
  • Motor protection switch (ATTR-172): yes
  • Number of inlets (ATTR-B1B): 1  PCE
  • Inlet nominal size (OD) (ATTR-B1CB): 160  MMT
  • Pressure pipe connection (DN) (ATTR-B17): 50  MMT
  • Pumping volume (ATTR-B10): 350  LTR
  • Wastewater quantity (ATTR-310): High
  • Type of wastewater (ATTR-6): wastewater without sewage
  • Colour (ATTR-102): black
  • Standard (ATTR-9): EN 12050-2
  • CE marking (ATTR-A5B): yes
  • Delivery state (ATTR-189): Pre-mounted for final assembly on site (pumps and sensor system must be fitted on site and control unit must be connected)
  • External monitoring (ATTR-A8): LGA
  • Brand (M-ATTR-001): KESSEL
  • Product group (M-ATTR-002): Lifting stations
  • Product type (M-ATTR-003): Pumping station
  • Product family (M-ATTR-004): Aqualift
  • Product name (M-ATTR-005): Aqualift S XL
  • Start-up current (ATTR-285): 52.2  AMP