Pumping station Aquapump XL
Duo, GTF1400-S1, 400V
The pumping station for faecal-free wastewater is equipped with a submersible pump and a backflow preventer. The collection tank made of permanently resistant polymer (PE) has an open pump tank with universal connection options. Quick-release closures enable the integrated components to be removed easily. The station is controlled by a user-friendly control unit, which is optionally integrated in the building management system via a potential-free contact. Alternatively, alarm and collective fault messages can be output via a GSM interface. The KESSEL modular system provides different engineering chamber options as accessories for the further layout. Stainless steel pump removal chains available as accessory for each installation depth - Article number: 680528 = Length 2 m 680529 = Length 3 m 680530 = Length 4 m 680531 = Length 5 m
- Maximum safety
- Flexible installation
- Also handles large quantities of faecal-free wastewater
| Item no. | 8743048 |
|---|---|
| Price group | 60 |
Pumping station Aquapump XL Duo, GTF1400-S1, 400V
The pumping station for faecal-free wastewater is equipped with a submersible pump and a backflow preventer. The collection tank made of permanently resistant polymer (PE) has an open pump tank with universal connection options. Quick-release closures enable the integrated components to be removed easily. The station is controlled by a user-friendly control unit, which is optionally integrated in the building management system via a potential-free contact. Alternatively, alarm and collective fault messages can be output via a GSM interface. The KESSEL modular system provides different engineering chamber options as accessories for the further layout. Stainless steel pump removal chains available as accessory for each installation depth - Article number: 680528 = Length 2 m 680529 = Length 3 m 680530 = Length 4 m 680531 = Length 5 m Type of wastewater: wastewater with sewage Installation situation: floor slab installation, floor slab installation Version: Type of system: Twin pump station Installation: Wet installation Backflow preventer: integrated Passage seal for ventilation pipe (DN): 50 mm Passage seal for conduit pipe (DN): 63 mm Delivery state: Pre-mounted for final assembly on site (pumps and sensor system must be fitted on site and control unit must be connected) General characteristics: Colour: black Standard: EN 12050-2 Dimensions: Length: 1,300 mm Width: 1,300 mm Height: 1,416 mm Tank: Number of inlets: 1 ST Inlet nominal size (DN): 150 Inlet nominal size (OD): 160 mm Pumping volume: 350 l Pressure pipe connection: horizontal Pressure pipe connection (DN): 80 mm Pressure pipe connection (OD): 90 mm Pumping device: Pump: GTF 1400 Number of pumps: 2 Max. pumping capacity: 31 m3/h Max. pumping height: 10.5 m Operating voltage: 400 V Mains frequency: 50 Hz Operating mode: S1 Power P1: 1.5 kW Power P2: 1.1 kW Speed: 2,900 U/min Type of fuse required (electrical protection): C 16 A Max. temperature (permanent) of conveyed material: 40 °C Connection type: Direct connection Weight: 22 kg Impeller type: Multi-vane impeller Length of mains cable for pump: 10 m Rated current: 6.5 A Protection class (pump): IP 68 (20m) Protection class: I Type of pump connection cable: H07RN-F 3G 1.0 mm2 Temperature monitoring: integrated Insulation class: H Control: Control unit: Comfort Operating voltage: 400 V Mains frequency: 50 Hz Self-diagnosis system (SDS): yes Battery buffering: yes Multi-line display: yes Log book function: yes USB interface: yes GSM interface: yes Potential-free contact: optional Type of fuse required (electrical protection): C 16 A Motor protection switch: yes Protection class control unit: IP 54 Length of mains cable for control unit: 1.4 m Type of level measurement: hydrostatic Level measurement instrument: Level sensor Alarm sensor: Level sensor
Installation Video
| Title | Item no. |
|---|
| Title | Item no. |
|---|
| Title | Item no. | ||
|---|---|---|---|
 | Basic warning device with electronic probe | 20222 | Show |
| Basic warning device with optical probe | 20223 | Show |
 | Compressor set for air bubbling | 28048 | Show |
 | Cable fastener Set for engineering chamber | 28076 | Show |
 | TeleControl GSM modem for Comfort control units 230V/400V | 28792 | Show |
 | Aerial with magnetic base for TeleControl Modem, Cable 2.5 m | 28793 | Show |
 | Extension cable for aerial with magnetic base, L: 2 m | 28794 | Show |
 | Connection box for level sensor extension | 28799 | Show |
 | Pressure hose Sold by the metre, 6x4 mm 100 | 680071 | Show |
 | Seal for intermediate section | 680125 | Show |
 | Intermediate section 250 mm, for chamber module LW 1000 | 680370 | Show |
 | Intermediate section 500 mm, for chamber module LW 1000 | 680371 | Show |
 | Connecting bolt set Set of 10 | 680373 | Show |
 | Replacement chain pumping statio. Stainless steel, length 2 m | 680528 | Show |
| Replacement chain pumping statio. Stainless steel, length 3 m | 680529 | Show |
| Replacement chain for pumping stations Stainless steel, Length 4 m | 680530 | Show |
| Replacement chain, pumping stat. Stainless steel, length 5 m | 680531 | Show |
 | Replacement set optical probe | 80888 | Show |
 | Sealing set Cable conduit, DN 100 | 85410 | Show |
 | Installation set Thermostat, Hygrostat | 97713 | Show |
 | Outdoor control cabinet W: 590 mm, for control unit installation | 97714 | Show |
 | Warning beacon for outdoor control cabinet | 97715 | Show |
| Outdoor control cabinet W: 460 mm, for control unit installation | 97716 | Show |
| Outdoor control cabinet W: 785 mm, for control unit installation | 97723 | Show | |
| Outdoor control cabinet W: 1115 mm, for control unit installation | 97724 | Show |
| Title | Item no. |
|---|
| Catalog Page | |
|---|---|
| Declaration of Performance |
- Area of application (ATTR-264): drainage
- Pump type (ATTR-265): submersible pump
- Pump shaft position (ATTR-266): vertical
- Pump design (ATTR-267): Dry rotor pump
- Pump hydraulics (ATTR-268): single stage
- Pump suction characteristic (ATTR-269): non-self-priming
- Pump drive (ATTR-270): E-motor for three-phase current
- E-motor, type of startup (ATTR-271): direct
- Pump casing material (ATTR-272): Grey iron
- Upper tolerance of the operating voltage (+) (ATTR-273): 5 PROZ
- Lower tolerance of the operating voltage (-) (ATTR-274): 5 PROZ
- Pump electrical connection (ATTR-277): 3/N/PE 400V
- Motor pump shaft (ATTR-279): continuous
- Shaft seal (ATTR-280): MS
- Number of operating pumps (ATTR-281): 1
- Minimum pumped media temperature (ATTR-282): 0 CEL
- Maximum operating pressure (Pmax) (ATTR-283): 1,050 HPA
- Minimum speed for speed adjustment (ATTR-284): no speed adjustment
- Pump (ATTR-4): GTF 1400
- Number of pumps (ATTR-181): 2
- Impeller type (ATTR-8): Multi-vane impeller
- Max. permissible switching frequency (ATTR-162): 20 1PH
- Operating mode (ATTR-10): S1
- Power P1 (ATTR-F4): 1.5 KWT
- Power P2 (ATTR-F5): 1.1 KWT
- Speed (ATTR-F2): 2,900 UMIN
- Operating voltage (ATTR-131): 400 VLT
- Mains frequency (ATTR-N4): 50 HTZ
- Rated current (ATTR-N5): 6.5 AMP
- Max. pumping capacity (ATTR-F7): 31 MQH
- Max. pumping height (ATTR-F8): 10.5 MTR
- Max. temperature (permanent) of conveyed material (ATTR-132): 40 CEL
- Protection class (ATTR-133): I
- Protection class (pump) (ATTR-125): IP 68 (20m)
- Length of mains cable for pump (ATTR-11): 10 MTR
- Weight (ATTR-191): 22 KGM
- Insulation class (ATTR-193): H
- Expected service life (hours of operation) (ATTR-194): 5,000 HUR
- Expected service life (number of switching cycles) (ATTR-195): 150,000
- Inlet nominal size (DN) (ATTR-B1CA): 150
- Length (ATTR-A6A): 1,300 MMT
- Width (ATTR-A6B): 1,300 MMT
- Height (ATTR-A6C): 1,416 MMT
- Number of packages (ATTR-321): 0
- Type of system (ATTR-2): Twin pump station
- Installation (ATTR-164): Wet installation
- Backflow preventer (ATTR-165): integrated
- Number of inlets (ATTR-B1B): 1 PCE
- Inlet nominal size (OD) (ATTR-B1CB): 160 MMT
- Pressure pipe connection (DN) (ATTR-B17): 80 MMT
- Pumping volume (ATTR-B10): 350 LTR
- Control unit (ATTR-S2):
Comfort
- Self-diagnosis system (SDS) (ATTR-S5): yes
- Battery buffering (ATTR-S6): yes
- Multi-line display (ATTR-S7): yes
- Log book function (ATTR-S8): yes
- USB interface (ATTR-S9): yes
- GSM interface (ATTR-S10): yes
- Potential-free contact (ATTR-S11): optional
- Length of mains cable for control unit (ATTR-S12): 1.4 MTR
- Operating voltage (ATTR-S13): 400 VLT
- Mains frequency (ATTR-S14): 50 HTZ
- Protection class control unit (ATTR-S4): IP 54
- Alarm sensor (ATTR-S1): Level sensor
- Type of level measurement (ATTR-7A): hydrostatic
- Level measurement instrument (ATTR-7B): Level sensor
- Type of fuse required (electrical protection) (ATTR-S17): C 16 A
- Motor protection switch (ATTR-172): yes
- - (ATTR-S21):
- - (ATTR-S22):
- - (ATTR-S23):
- Wastewater quantity (ATTR-310):
High
- Type of wastewater (ATTR-6):
wastewater with sewage
- Colour (ATTR-102): black
- Standard (ATTR-9): EN 12050-2
- CE marking (ATTR-A5B):
yes
- Delivery state (ATTR-189): Pre-mounted for final assembly on site (pumps and sensor system must be fitted on site and control unit must be connected)
- External monitoring (ATTR-A8): LGA
- Brand (M-ATTR-001): KESSEL
- Product group (M-ATTR-002): Lifting stations
- Product type (M-ATTR-003): Pumping station
- Product family (M-ATTR-004): Aqualift
- Product name (M-ATTR-005): Aqualift S XL
- Start-up current (ATTR-285): 52.2 AMP
- Installation situation (ATTR-1):
floor slab installation
- Type of pump connection cable (ATTR-N2): H07RN-F 3G 1.0 mm2
- Type of fuse required (electrical protection) (ATTR-N3): C 16 A
- Connection type (ATTR-N1): Direct connection
- Temperature monitoring (ATTR-135): integrated
- Pressure pipe connection (ATTR-B7): horizontal
- Passage seal for ventilation pipe (DN) (ATTR-183): 50 MMT
- Passage seal for conduit pipe (DN) (ATTR-184): 63 MMT
- Pressure pipe connection (OD) (ATTR-B18): 90 MMT