Skip to main content
Reset
Reset
Search
Contact
English
back
Products
Overview
back
Service
Overview
back
About KESSEL
Overview
back
Backwater protection
back
Hybrid lifting stations
back
Pump technology
back
Drain technology
back
Separators
back
Engineering chambers
back
Individual solutions
back
Catalogues & brochures
back
BIM data and CAD drawings
back
Spare parts
back
SmartSelect
back
Installation and operating instructions
back
Company profile
back
Integrated management system
back
Sustainability
QUICKLINKS

Pumping station Aquapump Small

Mono, Basic, STF 1300-S3

PDF product data sheet

The pumping station for faecal wastewater is suitable for underground installations and is equipped with a backflow preventer for the pressure pipe. The PE tank is resistant to domestic wastewater and includes a pedestrian class polymer cover plate. The pump with multi-vane impeller ensures maximum operating reliability. Quick-release closures enable the integrated components to be removed easily. The components are pre-assembled for final assembly on site. Including openings for inlet, ventilation and cable duct.

  • Variable connection options
  • With quick-release closures for easy removal and cleaning
  • Vertically adjustable upper section
Item no. 829710
GTIN 4026092083598
Price group 20
Back to table of variants

Pumping station Aquapump Small Mono, Basic, STF 1300-S3
The pumping station for faecal wastewater is suitable for underground installations and is equipped with a backflow preventer for the pressure pipe. The PE tank is resistant to domestic wastewater and includes a pedestrian class polymer cover plate. The pump with multi-vane impeller ensures maximum operating reliability. Quick-release closures enable the integrated components to be removed easily. The components are pre-assembled for final assembly on site. Including openings for inlet, ventilation and cable duct. Type of wastewater: wastewater with sewage Installation situation: underground installation Version: Type of system: Single station Installation: Dry installation Pump control: Float switch Backflow preventer: integrated General characteristics: Colour: black Standard: EN 12050-1 Dimensions: Length: 615 mm Width: 600 mm Height: 830 mm Tank: Inlet max. scoring (DN): 100 mm Pumping volume: 25 l Pressure pipe connection (DN): 50 mm Pressure pipe connection (OD): 63 mm Coverage features: Type of cover: Round cover plate Colour of cover: black Load class: K 3 (EN 1253-1) Locking: locked Free passage: 40 mm Pumping device: Pump: STF 1300 Number of pumps: 2 Max. pumping capacity: 21 m3/h Max. pumping height: 10 m Operating voltage: 230 V Mains frequency: 50 Hz Operating mode: S3 - 50 % Power P1: 1.3 kW Power P2: 0.8 kW Speed: 2,650 U/min Type of fuse required (electrical protection): C 16 A Max. temperature (permanent) of conveyed material: 40 °C Connection type: coded plug Weight: 10 kg Impeller type: Multi-vane impeller Length of mains cable for pump: 10 m Rated current: 6 A Protection class (pump): IP 68 (3m) Protection class: I Type of pump connection cable: H07RN-F 3G 1.0 mm2 Temperature monitoring: integrated Insulation class: F Control: Motor protection switch: yes Level measurement instrument: Float switch
  Title Item no.  
  Title Item no.  
  Title Item no.  
  Title Item no.  
Seal for upper section, from 07/2014 680150
One-handed closure DN 63 680380
Backflow preventer right, with non-return flap 680382
Non-return flap for Pumpfix XL 680630
Cover plate round, incl. screws and seal 680801
Flap housing with pressure piping, DA: 50 mm 680802
Replacement pump STF 1300 230 V, with float switch 680803
Multi-vane impeller for STF 1300 680804
Spiral housing for STF 1300 680805
Pressure pipe connection for pumping stations Mono 680807
  • Country of origin (ATTR-322): DE
  • Area of application (ATTR-264): drainage
  • Pump type (ATTR-265): Freestanding pump
  • Pump shaft position (ATTR-266): vertical
  • Pump design (ATTR-267): Dry rotor pump
  • Pump hydraulics (ATTR-268): single stage
  • Pump suction characteristic (ATTR-269): non-self-priming
  • Pump drive (ATTR-270): E-motor for alternating current
  • E-motor, type of startup (ATTR-271): direct
  • Pump casing material (ATTR-272): Polymer
  • Upper tolerance of the operating voltage (+) (ATTR-273): 10  PROZ
  • Lower tolerance of the operating voltage (-) (ATTR-274): 10  PROZ
  • Pump electrical connection (ATTR-277): 1/N/PE 230V
  • Startup circuit for three-phase connection or three-phase current (ATTR-278):
  • Motor pump shaft (ATTR-279): continuous
  • Shaft seal (ATTR-280): RSSR
  • Number of operating pumps (ATTR-281): 1
  • Minimum pumped media temperature (ATTR-282): 0  CEL
  • Maximum operating pressure (Pmax) (ATTR-283): 1,000  HPA
  • Start-up current (ATTR-285): 14.9  AMP
  • Vertical installation (ATTR-286): yes
  • Pump (ATTR-4): STF 1300
  • Number of pumps (ATTR-181): 2
  • Impeller type (ATTR-8): Multi-vane impeller
  • Type of pump connection cable (ATTR-N2): H07RN-F 3G 1.0 mm2
  • Type of fuse required (electrical protection) (ATTR-N3): C 16 A
  • Operating mode (ATTR-10): S3 - 50 %
  • Power P1 (ATTR-F4): 1.3  KWT
  • Power P2 (ATTR-F5): 0.8  KWT
  • Speed (ATTR-F2): 2,650  UMIN
  • Operating voltage (ATTR-131): 230  VLT
  • Mains frequency (ATTR-N4): 50  HTZ
  • Rated current (ATTR-N5): 6  AMP
  • Max. pumping capacity (ATTR-F7): 21  MQH
  • Max. pumping height (ATTR-F8): 10  MTR
  • Max. temperature (permanent) of conveyed material (ATTR-132): 40  CEL
  • Protection class (ATTR-133): I
  • Connection type (ATTR-N1): coded plug
  • Protection class (pump) (ATTR-125): IP 68 (3m)
  • Length of mains cable for pump (ATTR-11): 10  MTR
  • Temperature monitoring (ATTR-135): integrated
  • Weight (ATTR-191): 10  KGM
  • Insulation class (ATTR-193): F
  • Free passage (ATTR-180): 40  MMT
  • Net weight (ATTR-A3A): 26  KGM
  • Type of cover (ATTR-A21): Round cover plate
  • Colour of cover (ATTR-A2A): black
  • Load class (ATTR-A2B): K 3 (EN 1253-1)
  • Locking (ATTR-A2D): locked
  • Length (ATTR-A6A): 615  MMT
  • Width (ATTR-A6B): 600  MMT
  • Height (ATTR-A6C): 830  MMT
  • Volume (ATTR-320): 0.5  MTQ
  • Packaging dimension: length (ATTR-325): 792  MMT
  • Packaging dimension: width (ATTR-326): 653.8  MMT
  • Packaging dimension: height (ATTR-327): 916.3  MMT
  • Dimensions (ATTR-323): 80X70X95 CM
  • Number of packages (ATTR-321): 0
  • Type of system (ATTR-2): Single station
  • Installation (ATTR-164): Dry installation
  • Backflow preventer (ATTR-165): integrated
  • Pump control (ATTR-134): Float switch
  • Inlet max. scoring (DN) (ATTR-B1E): 100  MMT
  • Pressure pipe connection (DN) (ATTR-B17): 50  MMT
  • Pressure pipe connection (OD) (ATTR-B18): 63  MMT
  • Pumping volume (ATTR-B10): 25  LTR
  • Gross weight (ATTR-A3B): 32  KGM
  • Motor protection switch (ATTR-172): yes
  • Colour (ATTR-102): black
  • Standard (ATTR-9): EN 12050-1
  • Declaration of Performance (DOP) (ATTR-292): 009-086
  • Type of wastewater (ATTR-6): wastewater with sewage
  • Installation situation (ATTR-1): underground installation
  • Brand (M-ATTR-001): KESSEL
  • Product group (M-ATTR-002): Lifting stations
  • Product type (M-ATTR-003): Pumping station
  • Product family (M-ATTR-004): Aqualift
  • Product name (M-ATTR-005): Aqualift F Basic
  • - (ATTR-370):
  • Level measurement instrument (ATTR-7B): Float switch