Skip to main content

Lifting station Aqualift F Basic

Tronic, SPF 1300, 230 V

PDF product data sheet

The lifting station for faecal and faecal-free wastewater is equipped with a submersible pump and a backflow preventer. The collection tank made of permanently resistant polymer (PE) offers universal connection options and has a screwed access cover. The station is controlled by a user-friendly control unit, which can be optionally integrated in the building management system via a potential-free contact or alarm and collective fault messages can be output via a GSM interface (Comfort control unit).

Item no. 28798
GTIN 4026092074756
Discount group 5

Lifting station Aqualift F Basic Tronic, SPF 1300, 230 V
The lifting station for faecal and faecal-free wastewater is equipped with a submersible pump and a backflow preventer. The collection tank made of permanently resistant polymer (PE) offers universal connection options and has a screwed access cover. The station is controlled by a user-friendly control unit, which can be optionally integrated in the building management system via a potential-free contact or alarm and collective fault messages can be output via a GSM interface (Comfort control unit). Version: Type of system: Single station Installation: Dry installation Pump control: Control unit Backflow preventer: integrated Installation situation: free-standing set-up Type of wastewater: wastewater with and without sewage General characteristics: Colour: black Standard: EN 12050-1 Dimensions: Length: 565 mm Width: 624 mm Height: 483 mm Tank: Number of inlets: 50.7 ST Inlet nominal size (DN): 50 mm Connection for manual diaphragm pump (DN): 32 Tank volume: 50 l Pressure pipe connection (DN): 80 mm Pressure pipe connection (OD): 90 mm Venting connection (DN): 70 mm Pumping volume: 20 l Drain body: Socket version: including spigot and socket Free passage: 40 mm Pumping device: Pump: SPF 1300 Number of pumps: 1 Max. pumping capacity: 31 m3/h Max. pumping height: 8.9 m Operating voltage: 230 V Mains frequency: 50 Hz Operating mode: S3 - 15 % Power P1: 1.5 kW Power P2: 1 kW Speed: 2,650 U/min Type of fuse required (electrical protection): C 10 A Max. temperature (permanent) of conveyed material: 40 °C Weight: 24 kg Impeller type: Multi-vane impeller Length of mains cable for pump: 5 m Rated current: 6.5 A Protection class (pump): IP 68 (3m/48h) Protection class: I Insulation class: F Control: Control unit: Basic Operating voltage: 230 V Mains frequency: 50 Hz Self-diagnosis system (SDS): no Battery buffering: yes Multi-line display: no Log book function: no Potential-free contact: optional Motor protection switch: yes Protection class control unit: IP 54 Length of mains cable for control unit: 5 m Type of level measurement: mechanical Alarm sensor: Float switch

Installation Video

  Title Item no.  
  Title Item no.  
  Title Item no.  
Elastic union joint for hoses Ø 110 28663
Flange joint DN 100, for polymer fittings 28712
Shut-off valve DN 80, Polymer, vert 28715
Shut-off valve DN 80, Polymer, vertical with flange 28716
Hole saw for DN 50/70/100 500101
Seal for pipe penetration, DN 50 850114
Seal for channel passage 75 mm 850116
Seal for channel passage 110 mm 850117
  Title Item no.  
  • Declaration of Performance (DOP) (ATTR-292): 009-038
  • Net weight (ATTR-A3A): 22  KGM
  • Gross weight (ATTR-A3B): 24.3  KGM
  • - (ATTR-370):
  • Area of application (ATTR-264): drainage
  • Pump type (ATTR-265): Freestanding pump
  • Pump shaft position (ATTR-266): vertical
  • Pump design (ATTR-267): Dry rotor pump
  • Pump hydraulics (ATTR-268): single stage
  • Pump suction characteristic (ATTR-269): non-self-priming
  • Pump drive (ATTR-270): E-motor for alternating current
  • E-motor, type of startup (ATTR-271): direct
  • Pump casing material (ATTR-272): Polymer
  • Upper tolerance of the operating voltage (+) (ATTR-273): 10  PROZ
  • Lower tolerance of the operating voltage (-) (ATTR-274): 10  PROZ
  • Upper tolerance of the nominal frequency (+) (ATTR-275): 3  PROZ
  • Lower tolerance of the nominal frequency (-) (ATTR-276): 2  PROZ
  • Pump electrical connection (ATTR-277): 1/N/PE 230V
  • Startup circuit for three-phase connection or three-phase current (ATTR-278):
  • Motor pump shaft (ATTR-279): continuous
  • Shaft seal (ATTR-280): RSSR
  • Minimum pumped media temperature (ATTR-282): 0  CEL
  • Maximum operating pressure (Pmax) (ATTR-283): 890  HPA
  • Start-up current (ATTR-285): 14.9  AMP
  • Pump (ATTR-4): SPF 1300
  • Number of pumps (ATTR-181): 1
  • Impeller type (ATTR-8): Multi-vane impeller
  • Type of fuse required (electrical protection) (ATTR-N3): C 10 A
  • Operating mode (ATTR-10): S3 - 15 %
  • Power P1 (ATTR-F4): 1.5  KWT
  • Power P2 (ATTR-F5): 1  KWT
  • Speed (ATTR-F2): 2,650  UMIN
  • Operating voltage (ATTR-131): 230  VLT
  • Mains frequency (ATTR-N4): 50  HTZ
  • Rated current (ATTR-N5): 6.5  AMP
  • Max. pumping capacity (ATTR-F7): 31  MQH
  • Max. pumping height (ATTR-F8): 8.9  MTR
  • Max. temperature (permanent) of conveyed material (ATTR-132): 40  CEL
  • Protection class (ATTR-133): I
  • Protection class (pump) (ATTR-125): IP 68 (3m/48h)
  • Length of mains cable for pump (ATTR-11): 5  MTR
  • Weight (ATTR-191): 24  KGM
  • Insulation class (ATTR-193): F
  • Number of inlets (ATTR-B1B): 50.7  PCE
  • Inlet nominal size (DN) (ATTR-B1CA): 50  MMT
  • Venting connection (DN) (ATTR-B4): 70  MMT
  • Connection for manual diaphragm pump (DN) (ATTR-B4B): 32
  • Pressure pipe connection (DN) (ATTR-B17): 80  MMT
  • Pressure pipe connection (OD) (ATTR-B18): 90  MMT
  • Tank volume (ATTR-B9): 50  LTR
  • Pumping volume (ATTR-B10): 20  LTR
  • Length (ATTR-A6A): 565  MMT
  • Width (ATTR-A6B): 624  MMT
  • Height (ATTR-A6C): 483  MMT
  • Volume (ATTR-320): 0.2  MTQ
  • Packaging dimension: length (ATTR-325): 610  MMT
  • Packaging dimension: width (ATTR-326): 610  MMT
  • Packaging dimension: height (ATTR-327): 490  MMT
  • Dimensions (ATTR-323): 610X610X490MM
  • Number of packages (ATTR-321): 0
  • Type of system (ATTR-2): Single station
  • Installation (ATTR-164): Dry installation
  • Backflow preventer (ATTR-165): integrated
  • Pump control (ATTR-134): Control unit
  • Socket version (ATTR-233): including spigot and socket
  • Control unit (ATTR-S2): Basic
  • Self-diagnosis system (SDS) (ATTR-S5): no
  • Battery buffering (ATTR-S6): yes
  • Multi-line display (ATTR-S7): no
  • Log book function (ATTR-S8): no
  • Potential-free contact (ATTR-S11): optional
  • Length of mains cable for control unit (ATTR-S12): 5  MTR
  • Operating voltage (ATTR-S13): 230  VLT
  • Mains frequency (ATTR-S14): 50  HTZ
  • Protection class control unit (ATTR-S4): IP 54
  • Alarm sensor (ATTR-S1): Float switch
  • Type of level measurement (ATTR-7A): mechanical
  • Motor protection switch (ATTR-172): yes
  • - (ATTR-S21):
  • - (ATTR-S22):
  • - (ATTR-S23):
  • Standard (ATTR-9): EN 12050-1
  • CE marking (ATTR-A5B): yes
  • Installation situation (ATTR-1): free-standing set-up
  • Free passage (ATTR-180): 40  MMT
  • Type of wastewater (ATTR-6): wastewater with and without sewage
  • Colour (ATTR-102): black
  • External monitoring (ATTR-A8): LGA
  • TÜV test mark (ATTR-376): ID 1111241940